Garmat – Extraction Wall


Extraction wall 1,5 x 2m

This extraction wall has the following characteristics:

Exhaust wall with dry filtering, equipped as standard with an inertia filter + Paintstop filter + fine filter. The filter is fixed in three places for easy replacement.
Unit in GALVA version

Dimensions :
Front panel : ( 1 500 x 2 400 x 1 000 ) mm
Filter surface : ( 1,250 x 2,400 x 2,400 ) mm

Extraction :
Fan: ADN 355 L ex, non-sparking version.
Flow rate: ± 6 500 m³/h
Motor: 3 kW, 3 x 380 V, 1,500 rpm
Suction channel diameter: 500 mm

Lighting :

one lighting element of 4 x 30 W = 120 W

Electrical control box with :
All electrical components are located outside the spray area and are of standard design.
Main switch
Direct start meter with thermal and magnetic motor protection switch
The necessary witnesses

Options per suction wall :
Suction channel Ø 500 mm, per 3m
Lighting per room
UT with 1 m tube (through-the-wall)
Rain hood: extraction – automatic closing
Front extension by 500 mm
Additional height per 500 mm
Complete control panel
RDN fan (= better efficiency)
Noise reduction below 75 dB
Silencer in the discharge pipe per 1 m (580/580)
Activated carbon filter (motor: 5.5 kW)
Rear engine and exhaust
White lacquered group

Delivery and assembly :

The assembly is carried out with the help of the customer: install the extraction unit on site and mount the front housing (takes max. 3 hours).

Not included in the price :

– installation of the exhaust pipe and rain hood
– laying and connecting the electrical cable.
All additional work will be carried out by a technician from Garmat Europe NV according to the agreed conditions.


Extraction wall 2 x 2m

This extraction wall has the following characteristics :

Exhaust wall with dry filtering, equipped as standard with an inertia filter + Paintstop filter + fine filter. The filter is fixed in three places for easy replacement.
Unit in GALVA version

Dimensions :

Front: ( 2,000 x 2,400 x 1,000 ) mm
Filter surface : ( 1,250 x 2,400 x 2,400 ) mm

Extraction :

fan ADN 335 L ex, non-sparking version.
Flow rate ± 6,500 m³/h
Motor: 3 kW, 3×380 V, 1,500 rpm
Extraction channel diameter: 500 mm

Lighting :

one lighting element of 4 x 30 W = 120 W
Electrical control box with :
All electrical components are located outside the spray area and are of standard design :

– Main switch
– Direct engine start with magneto-thermal engine protection switch
– The necessary witnesses

Extraction Wall Options :

Exhaust duct: Ø 500 mm, per 3m
Lighting per room
UT with 1 m tube (through-the-wall)
Rain hood: extraction – automatic closing
Front extension by 500 mm
Additional height per 500 mm
Extended control panel: star/delta control
RDN fan (= better efficiency)
Noise reduction below 75 dB
Silencer in the discharge pipe per 1m (580/580)
Activated carbon filter (motor: 5.5 kW)
Rear engine and exhaust
White lacquered group

Delivery and assembly :

The assembly is carried out with the help of the customer: install the extraction unit on site and mount the front housing (takes max. 3 hours).

Not included in the price :

– installation of the exhaust pipe and rain hood
– laying and connecting the electrical cable
All additional work will be carried out by a technician from Garmat Europe NV according to the agreed conditions.


Extraction wall 3 x 2m

This extraction wall has the following characteristics :

Extraction wall with dry filtration, equipped as standard with an inertia filter + Paintstop filter + fine filter. The filter is fixed in three places for easy replacement
Group in execution of GALVA

Dimensions :

Front: ( 3,000 x 2,400 x 1,000 ) mm
Filter surface : ( 2 500 x 2 400 x 2 400 ) mm

Exhaust :

fan ADN 450 L ex
± 11,000 m³/h, explosion-proof design.
Motor 3 kW, 3 x 380 V, 1,500 rpm
Exhaust duct diameter: 630 mm
Electrical control box with :

All electrical components are located outside the spray area and are of standard design.

Main switch
Direct start motor with thermal and magnetic motor protection switch.
Extraction wall options :
Extraction duct Ø 630 mm, per 3m
Lighting per room
UT with 1 m tube (through-the-wall)
Rain hood: extraction – automatic closing
Front extension by 500 mm
Additional height per 500 mm
Extended control panel: star/delta control
RDN fan (= better efficiency)
Noise reduction below 75 dB
Silencer in exhaust duct per 1m (650/650)
Activated carbon filter
Rear engine and exhaust
White lacquered group

Delivery and assembly :

The assembly is carried out with the help of the customer: install the extraction unit on site and mount the front housing (takes max. 3 hours).

Not included in the price :

– installation of the exhaust pipe and rain hood
– laying and connecting the electrical cable
All additional work will be carried out by a technician from Garmat Europe NV according to the agreed conditions.


Extraction wall 4 x 2m

This extraction wall has the following characteristics :

Group in execution of GALVA

Dimensions :

Front panel : ( 4 000 x 2 400 x 1 000 ) mm
Filter surface : ( 3 750 x 2 400 x 2 400 ) mm

Exhaust :

fan ADN 500 L ex
± 16,000 m³/h, explosion-proof design.
Motor 4 kW, 3 x 380 V, 1,500 rpm
Diameter of the extraction channel: 710 mm

Lighting :

two lighting elements each 4×30 W = 240 W

Electrical control box with :

All electrical components are located outside the spray area and are of standard design.
Main switch
Star-delta starter with magneto-thermal motor protection switch.
Necessary warning lights.

General information :

In addition to the 1 m front construction, a 300 mm high base is also provided on this length. In this way, ground extraction is also ensured. Underneath the E 50/2 type grilles are filter trays with Paint-Stop filters.

Options per extraction wall :

Extraction duct: Ø 710 mm, per 3m
Lighting per room
UT with 1 m tube (through-the-wall)
Rain hood: extraction – automatic closing
Front extension by 500 mm
Additional height per 500 mm
Extended control panel: star/delta control
RDN fan (= better efficiency)
Noise reduction below 75 dB
Silencer in the discharge pipe per 1 m (820/820)
Activated carbon filter (motor: 7.5 kW)
Rear engine and exhaust
White lacquered group

Delivery and assembly :

The assembly takes place with the help of the customer: install the extraction unit on site and assemble the front housing (takes max. 3 hours).

Not included in the price :

– Installation of the exhaust pipe and rain cover
– Laying and connecting the power cable
All additional work will be carried out by a technician from Garmat Europe NV according to the agreed conditions.


Manufacturer’s website : Garmat

Product website : Garmat-Extraction-Wall